Cheap Michael Jordan Fleer Factory Sealed Box Set 200 Cards & 86 Game Used Floor - Look for Rare $1,000 Autograph(Found 1 in Every 800 Sets)

Cheap Michael Jordan Fleer Factory Sealed Box Set 200 Cards & 86 Game Used Floor - Look for Rare $1,000 Autograph(Found 1 in Every 800 Sets)

Michael Jordan Fleer Factory Sealed Box Set 200 Cards & 86 Game Used Floor - Look for Rare $1,000 Autograph(Found 1 in Every 800 Sets) Product Description:

Product Description

This Factory Sealed Set is the ultimate Michael Jordan collection! NBA legend Michael Jordan was just enshrined in the Basketball Hall of Fame! This amazing original Factory Sealed set chronicles his incredible career and is a must have for every Jordan fan around the world! We are Proud to offer this original Michael Jordan Fleer Career Box Set that includes(200) unique and original glossy Fleer Michael Jordan Bulls cards ! Plus This Earth Shattering Set includes a Original 1986 Fleer Reprint Rookie Card with a piece of original game used floor! This set was released in 2007/08 and was only available at Target in the US for $59.99 plus tax! In addition look for rare Michael Jordan autographs and original 1986 Fleer Michael Jordan Rookie buybacks that have been randomly inserted in this product! Who Knows you may pull a rare Michael Jordan Autograph worth $1,000 ! (Found 1 in every 800 Sets). We wish you very, very good luck with your pulls! Most recently produced NBA Licensed Michael Jordan cards sell alone for $1 each so this set of 200 cards is worth around $200 alone! Plus the original game used floor card has been selling in the $25 range and it is included in this incredible Factory Sealed Set! Of course if you pull a Jordan Autograph it might be worth $1,000 or more! Words can not even describe how incredible looking this Michael Jordan Career Set is! (Please check out our Many Pictures!) The 200 Card Set consists of Four (4) different subsets and all cards feature Jordan in his Chicago Bulls Uniform where he won 6 NBA Titles! (1) The largest subset is 100 Michael Jordan cards and each card is similar in design to Jordans 1986 Fleer Rookie Card! If You are a Fan of NBA Legend Michael Jordan You must own this Factory Sealed Set! Makes the Perfect gift for all NBA Fans !

Latest Price: Click Here!
More Info: Click Here!
See Customers Review: Click Here!

Buy it Now

Cheap Silicone Paper for Dry Mounting Chinese Painting or Sumi-e(27" X 10 Yard)

Cheap Silicone Paper for Dry Mounting Chinese Painting or Sumi-e(27" X 10 Yard)

Silicone Paper for Dry Mounting Chinese Painting or Sumi-e(27" X 10 Yard) Product Description:

Product Description

The price is based on 27" x 10 yard (360"), or 66.5cm x 915cm unit size. You may order 20, 30, 40, or 50 yards. (The whole roll is 54 yards long. See our other item.)

The release paper keeps adhesive film clean and makes adhesive film easy to handle and protect the artwork and the iron or press machine.

Basic Mounting Method 1: Direct Mounting

In this method the orginal painting is mounted directly to the silicone paper.

1. Dampen the painting first. You may spray the original painting evenly with water.

2. Cut the silicone paper to the size exactly same as the original painting or slightly smaller.

3. Put 4 layers of denim cloth on the table as mounting surface.

4. Set the iron temperature to 180° F (between Silk and Wool) and Start the ironing movement from center out, first in cross and then in X movements to avoid bubbles.

5. Apply less pressure in the beginning and gradually increase pressure later. Don't press too hard or set temperature too hot. In other words you want to avoid any big fold or wrinkles which would become permanent. Small wrinkles can be streched out easily with hot iron.

Basic Method 2: Indirect Mounting.

This method is transfer the silicon adhesive film to the backing material first, then take the release paper off and mount the painting on. Here are the steps:

1. Place the silicone release paper filme side facing down, or mounting board, foam board etc..

2. Iron it along the edge and let it cool a little bit.

3. Cut the Silicone Release Paper a little bit larger (1/4" - 1/2") than the board along the edge. (No need to measure!)

4. Peel the release paper off and save it for use in step 6.

5. Trim the adhesive film along the board edge with a glue gone, knife or scissors.

6. Lay the artwork face up on the adhesive film and cover it with the release paper from step 4.

7. Now it's ready to put into a heat press machine or an iron.

The more you use the more advantages will be found.

Latest Price: Click Here!
More Info: Click Here!
See Customers Review: Click Here!

Buy it Now